IQOS is a sophisticated piece of electronics that heat specially designed tobacco units. The consumer presses the operating button to start heating, and then draws on the heated tobacco unit. The device heats tobacco without combustion then releases a flavorful vapor without burning the tobacco. IQOS comes in two versions, the first consist of HeatSticks, a holder, and a charger while the second combines the holder and charger to minimize recharging the battery.

IQOS 2.4 Plus
IQOS 2.4 Plus is a simple and easy to use device that provides a new level of experience. The 2.4 Plus comes in a sturdy and attractive cardboard box that consists of a pocket charger and holder system with a soft latch mechanism that is easy to open and close. The top button flips the lid open so you can get at the holder, that and the new Bluetooth button are now finished in a nice gold colour. The third button is the power button. Press the power button and after a couple of seconds the holder vibrated indicating that the device is heating. The LED button starts to pulse and after 20 seconds it switches to a steady glow then you are ready to vape.

The session in the 2.4 Plus
lasts for five minutes or 14 puffs. When you have 45 seconds or two puffs left to go the holder vibrates again, to let you know that the session is almost finished. The battery meter consists of 4 LEDs indicating the battery level. You need to to clean the IQOS device after every pack of HEETs.

IQOS 3.0 IQOS 3 and IQOS 3 Multi IQOS 3 and IQOS 3 Multi are the latest versions of the IQOS system which heats tobacco instead of burning it. IQOS 3 consists of two-part heated tobacco system with a new pocket charger that can be used 20 times. The equiped holder enhances vibration and provides a responsive experience with every use.

How to use IQOS
The heated tobacco unit is inserted into the holder, which contains the heater. The holder supplies heat to the heated tobacco unit for six minutes then the heated unit is removed from the holder and disposed. The holder can be recharged by inserting it into the charger. IQOS 3 was designed to guarantee performance across a range of weather conditions, it is also equipped with ProtectPlus System that safeguard the tobacco system, improves the shock resistance, provides longer holder battery time and improves overall device reliability.

IQOS Multi
Put the HEET into the end of the holder and hold the button down until the holder vibrates. The LED will blink to indicate that it is heating up. The LED switches to a steady glow when the device is ready. The session lasts for five minutes and 35 seconds, the device will vibrate to indicate that your session is nearly up.

IQOS 3 MULTI is a pocket size easy-to-carry heat-not-burn device that gives you 10 uninterrupted uses without having to charge the IQOS holder. The you need to plug your it into one of our handy docking stations or USB-C port car IQOS charger. IQOS 3 MULTI is available in Warm White, Stellar Blue, Velvet Grey and Brilliant Gold colors.Once the device is up to temperature, it vibrates to let you know it is ready for use, this takes approximately 15 to 20 seconds.

Once the session is over you need to remove the HEET by sliding the top cap upwards to push the HEET off the heating blade and release the cap. The LEDs button indicating the battery level. Each LED is approximate 25% charge.

IQOS 3 Multi battery should last for 10 HEETs before needing to be recharged and it is recommended to clean your IQOS device daily, check IQOS Manual.

To avoid battery damage do not leave your IQOS device for long period in direct sunlight or in hot places because it can significantly deteriorates, you also need to keep the IQOS device away from water.